DHC-6 Twin Otter Canadian Yellow 1870mm (73.6") Wingspan - ARF from Nexa - NXA-1004001
The De Havilland Canada DHC-6 Twin Otter, currently marketed as the Viking Air DHC-6 Twin Otter, is a Canadian 19-passenger STOL (Short Takeoff and Landing) utility aircraft developed by de Havilland Canada and currently produced by Viking Air. The aircraft’s fixed tricycle undercarriage, STOL abilities, and high rate of climb have made it a successful cargo, regional passenger airliner and Medevac aircraft. In addition, the Twin Otter has been popular with commercial skydiving operations, and is used by the United States Army Parachute Team and the United States Air Force’s 98th Flying Training Squadron.
The Nexa DHC-6 Twin Otter is a .25 size electric scale series civilian utility aircraft with a 1870mm wingspan, constructed primarily from balsa wood and covered in a Canadian yellow, red and black livery. This ARF requires assembly and installation of your choice of servos and power system, and includes two piece wing with aluminum wing joiner, fiberglass cowl and spinner. A large battery tray provides ample space for any size battery you require. An optional float set is available for snow or water-based operations (not included).
Visit the for additional photos, videos, reviews, and customer Q&A.
|
Fully Covered and Detailed The Nexa DHC-6 Twin Otter comes fully covered in a vibrant and attractive yellow, red and black Canadian livery. |
|
Scale Details Throughout There is no shortage of scale details with this Twin Otter including flaps, simulated panel lines and functional cabin doors. |
|
Large Battery Hatch The battery hatch is not only easily accessible but expansive with ample space for your chosen battery and any peripheral electronics such as a gyro if desired. |
|
Optional Float Set Available A set of optional floats is available and tailor-made for this model (not included). |
Features:
- High contrast and attractive yellow, red and black Canadian livery
- Complete Balsa and lite-ply construction for rigidity and durability
- Two piece wing with aluminum wing joiner for easy transport
- Large battery tray provides ample space for any size battery you require
- Functional cabin door and well appointed throughout
- Fiberglass cowling and spinner for strength and durability
- All control surfaces come out of the box pre-hinged and installed for convenience
- Optional floats available for snow or water-based operations (see below)
Includes:
- Nexa DHC-6 Twin Otter Canadian Yellow 1870mm (73.6") Wingspan - ARF
- Wheels, spinner, hardware and decals
Requires:
- 6 Channel radio - select a minimum 6 channel radio from our
- 6 Channel receiver - select a minimum 6 channel receiver from our
- 2x .25 size brushless outrunner motors - we recommend the
- 2x 65 Amp brushless ESCs - we recommend
- 2x 17g standard servos for ailerons - we recommend
- 2x 45g standard servos for elevator and rudder - we recommend
- 2x 9g standard servos for flaps - we recommend
- 3 Cell 11.1V 5000 - 6000 mAh LiPo Battery - we recommend the
- 2x Electric propellers - we recommend
- 3 Cell compatible battery charger - select a minimum 3 cell (3S) charger from our
Optional:
- DHC-6 Twin Otter float set - NXA-1004-118
Nexa ARF models are constructed out of balsa wood and plywood. These are not foam models. The assembly of balsa wood ARF aircraft requires basic model building skills including the installation of servos, ESC, and motor (or gas engine).
