Name: DJI Matrice 3D for Dock 2 w/ DJI Care Enterprise
SKU: 1246670

The all-new DJI Matrice 3D is specifically designed for DJI Dock 2. Matrice 3D is equipped with both a tele camera and a wide-angle camera with a mechanical shutter, meeting the needs for 1:500 high-precision mapping tasks.

High-Performance Aircraft

Wide Angle Camera	Tele Camera
4/3 CMOS 24mm Format Equivalent 20MP Effective Pixels Mechanical Shutter	1/2-inch CMOS ‌162mm Format Equivalent 12MP Effective Pixels

Superior, Comprehensive Performance

Thanks to its powerful operation capabilities, DJI Matrice 3D meets the requirements of high-standard operations.

IP54

Dustproof and Waterproof

50 Mins

Max Flight Time

6-Directional

Obstacle Sensing System

10 km

Max Effective Operating Radius

400

Battery Cycles

Integrated RTK Module

±3cm Positioning Accuracy

Specs

DJI Matrice 3D Specifications

Aircraft

Weight	3.1 lbs. (1410g)
Maximum take-off weight	3.54 lbs.
Dimensions	13.2"x15.66"x6" (335x398x153mm)
Working Temperature	20°C--45 °C
IP Rating	IP54
Max Flight Time	50 min
Max Ascent Speed	13.4 mph (normal mode) 17.8 mph (sport mode)
Max Descent Speed	13.4 mph (normal mode) 13.4 mph (sport mode)
Max Flight Speed	Normal mode: obstacle avoidance turned on: forward flight 33.5 mph, backward flight 26.8 mph side flight 22.3 mph. Sports mode: forward flight 47 mph, backward flight 40.2 mph, side flight 35.7 mph.
Max Horizontal Flight Speed	21 m/s
Max Hover Time	40 min
Max Wind Resistance	Wind resistance during operation: 26.8 mph Wind resistance during takeoff and landing: 17.9 mph.
Max Take-off Altitude	1.55 mi.
Max Operational Range	6.21 mi.

Wide-Angle Camera

Sensor	1/1.32 inch CMOS
Equivalent Focal Length	24 mm; 20MP
Shutter	Mechanical Shutter

Telephoto Camera

Sensor	1/2-inch CMOS
Equivalent Focal Length	161 mm; 12MP
Zoom	56x hybrid zoom

In the Box

(1) Matrice 3D Aircraft
(1) CW Propellers (Pair)
(1) CCW Propellers (Pair)
(1) Screws and Washers

FAQ

Are the accessories of the Mavic 3 Enterprise Series compatible with the Matrice 3D series?
Only the remote controller is shared between the two platforms.

Does the DJI Matrice 3D Series support manual flight with the RC Pro Enterprise?
Yes, but due to limited functions, it's recommended to only use RC Pro Enterprise to complete configuration and link the M3D Series as a controller B.

Does the M3D Series support mobile time-laps, smart follow, and time-lapse photography?
No, it does not.

Why does it rattle when I shake the Matrice 3D aircraft?
This is normal, as a damper has been installed in he aircraft arm to reduce vibrations.

DJI CARE ENTERPRISE

DJI's Care Enterprise plan comes standard with all enterprise/commercial drone systems and provides additional support and coverage in case of accidents or damages, to use Care Enterprise, the aircraft must be recovered to be sent into DJI for replacement. For full DJI Care Enterprise terms of service and FAQ, please .

Care Enterprise for the Matrice 3D is available in three (3) options:

Basic (1-Year): Provides one (1) year of coverage against damage caused by user error. The plan offers up to two (2) replacements within the year of coverage. The replacement fee for the both replacements is $266. Care Enterprise Basic on the Matrice 3D can be renewed after the first year for up to two (2) additional years and has a renewal fee of $380. In each additional year, users have two replacement options with a replacement fee of $266 each. Care Enterprise cannot be renewed beyond three (3) years.

Basic (2-Year): Provides two (2) years of coverage against damage caused by user error. The plan offers up to four (4) replacements within the two (2) years of coverage. The replacement fee for each replacement is $266. Care Enterprise can be renewed for one additional year to a total of three (3) years of coverage.

Basic coverage also includes one standard maintenance service per one (1) year of coverage.

Plus (1-Year): Provides one (1) year of coverage against damage caused by user error. The Plus plan offers unlimited aircraft replacements within the coverage amount for the one (1) year period of the coverage plan. Plus coverage can also be "pooled" or shared amongst a fleet, if all platforms are purchased with Plus and bound together in the same 30-day period. Care Enterprise Plus on the Matrice 3D can be renewed after the first year for up to two (2) additional years and has a renewal fee of $760 which provides an additional coverage amount of $3,800.

Plus coverage also includes one standard maintenance service per one (1) year of coverage.